THE LAST FLIGHT / A STEP-BY-STEP GUIDE
How to Make a GTA 5 Last Flight AI Video
Bring yourself into the airport farewell: look back at three familiar faces, board the plane and leave Los Santos behind.
THE SCENE
One last look before the flight
In GTA 5 Last Flight AI, the player waits at an airport with a game case, pulls a suitcase toward the gate and looks back. After the player boards, three familiar companions drive alongside the runway and watch the plane take off. Your photo changes the departing player; the reference video supplies the camera cuts, airport and other people.
Creator UEKAN (@uekan2b) shared the scene as “Last Flight Out of GTA5”. Watch the reference below before choosing where to cut it.
STEP 01 / THE REFERENCE
Prepare the airport reference video
Get the scene from UEKAN's post above, or use another version of the same airport farewell. Make sure you have permission to use the chosen video and audio. The reference shown here lasts about 36 seconds; check the upload limit in your video editor before starting.
For an editor limited to 30 seconds, open the clip on a timeline and split it at about 0:24.75, after the last close-up of the player at the airplane window. Save the first part for the AI edit and keep the remaining roughly 11 seconds as the runway ending. If your copy has different timing, cut after the player's final shot. This keeps the ending without trying to personalize footage in which the player no longer appears.
Want a shorter video? Choose a continuous part of the first segment containing the airport look-back or plane-window moment, then keep the ending separately. Your cut can differ from the prepared versions on this site.
STEP 02 / THE PERSON
Choose a photo of your player
Pick one clear picture of yourself or someone who has agreed to appear. Use a visible face and hair; a waist-up or full-body photo also gives the editor clothing and body context for the airport shots. The same person should be recognizable in the plane-window close-up.
In the reference, the player wears a teal shirt and tan pants and carries the suitcase. These details identify the person to replace; your photo supplies the new look. Do not add separate photos for the three companions.
STEP 03 / THE EDIT
Replace the player with Seedance 2.5
Choose Seedance 2.5 in Video Editing mode in an interface that accepts both a video and an image. This method uses the airport clip for its sequence and your photo for the player's appearance.
- Upload the first segment as Video 1.
- Add your photo as Image 1.
- Paste the prompt below. If the interface uses selectable @ mentions, select each upload using its displayed label.
- Keep the reference's framing, choose a supported resolution and check the displayed cost before generating.
In @Video1, replace only the player carrying a suitcase and a game case through the airport, who looks back and later sits by the airplane window, with the person in @Image1. The player's teal shirt and tan pants identify the original role only.
Use @Image1 for the new player's face, skin tone, body proportions, visible hair, clothing and accessories. Keep the same appearance across the airport and airplane shots.
Keep the other three men as they appear in @Video1. Preserve the suitcase, game case, airport, plane, vehicles, actions, camera angles and cuts. Do not add people or captions.If your clip begins in a different shot, adjust the first sentence to describe the player visible there. Check the airport look-back and plane-window close-up; the model can change details between shots.
STEP 04 / THE FINISH
Put the takeoff ending back
Place your finished edit on a video timeline. Add the saved runway segment immediately after it, starting at the cut you made in the reference. If the generated segment has a different length, adjust the join and check that no shot is repeated or skipped.
Add your chosen soundtrack underneath and align it with the cut. If you use the reference audio, line up the beginning and the transition with the source; generated sound may differ or be absent. Export an MP4 and watch the join and takeoff with sound before sharing.
A QUICKER START
Use the prepared Last Flight scene
The Last Flight template prepares the player segment and joins the takeoff ending for you. Add one photo and choose Economy (about 20 seconds), Standard (about 28 seconds) or Original (about 36 seconds). The ending stays as reference footage. Review the displayed credit cost before generating and check the final video and audio.
Open the Last Flight maker ↗GOOD TO KNOW
Questions and answers
Why split the Last Flight reference video?
The original scene is about 36 seconds. For a video editor with a 30-second input limit, edit the first 24.75 seconds containing the player, then join the remaining takeoff sequence in a timeline editor.
Which person does the photo replace?
The player carrying the suitcase and game case at the airport and sitting at the plane window. The three companions in the airport and cars remain part of the reference.
Can I use a shorter part of the airport farewell?
Yes. Select a continuous part that includes the look-back or plane-window shot you want to personalize, then add any ending you want to keep in a video editor.
Does the template personalize the final takeoff?
The template personalizes the player in the earlier segment and appends the original runway and takeoff ending, where the player no longer appears.